Receive FREE 4 Pack of Pre-Filters On Your ONLINE Order


Industrial Air Cleaners and Filtration Systems by Electrocorp

Multiple Purpose Dust Odor Chemical Fumes Smoke Air Purifiers, Air Cleaners, Air Scrubbers, Air Filtration Systems


Maintaining high quality air in our home and working environments has become the challenge of the 21st Century. Indoor air pollution, which has both natural and man-made origins, has gained a strong foothold in every corner of the industrial world. We see how dust from our natural environment and other man-made particulates continues to constitute a high percentage of our indoor airborne contaminants.


In today's world, the pollution generated by man has a high degree of modern technology at its source. Many of these particulate and chemical contaminants (VOCs - Volatile Organic Compounds) have a petrochemical origin, and we are exposed to them on a daily basis. Material Safety Data Sheets, medical publications, and even product labels, all note that many reports have associated repeated and prolonged occupational overexposure to VOCs with permanent brain and nervous system damage as well as many serious lung disorders due to airborne particulates. Other symptoms may include headaches, dizziness, weakness and fatigue. It is the responsibility of industries to do their best to remove these toxic, hazardous, or just nuisance contaminants from the work place in order to provide for employee safety and comfort. Electrocorp, have designed equipment that will greatly aid in that responsibility.


Electrocorp's equipment does not heat or cool the air, they just clean it, and clean air is good business.


Electrocorp Filtration Systems is a global innovator in chemical, odor and particle control and produces the most efficient and powerful air cleaners for industrial and commercial use.

About Our Activated Carbon + HEPA Filtration System


Activated carbon is widely recognized as the safest, most effective way to treat odors and chemicals, while HEPA (High Efficiency Particle Air) filters are the gold standard for removing particles. Together they provide the most complete and versatile air cleaning system available. Welder Picture


About "Activated" Carbon


Carbon that is 'activated' undergoes a process that opens up millions of tiny pores and fissures to enhance the material's adsorbent properties. The process creates a very large internal surface area, which is key to the power of activated carbon - the more surface area - the more the carbon can adsorb. Only one pound of activated carbon typically has a surface area of 125 acres. Activated carbon is so effective that it's used in military gas masks.


About HEPA Filters


HEPA stands for high efficiency particulate air filter and describes a filter that can remove at least 99.97% of airborne particles 0.3 microns in diameter. Particles of this size are used to evaluate the performance of a filter because they are among the most difficult to remove. However, particles that are larger or smaller than 0.3 microns can be filtered with even greater efficiency due to the nature of the filter’s design. True HEPA filters are composed of a dense web of fibers designed to trap particles. This type of filter was first used in the 1940’s to trap radioactive contaminants in the air and protect scientists who were developing the first nuclear weapons. Today, HEPA is considered the safest and most efficient method to treat airborne particles.

Electrocorp AirRhino Series

Ideal for mold remediation, hospital construction renovation contractors, chemical fumes odors removal, negative air pressure, positive air pressure options. AirRhino 2000 series (formerly AirWash 2000)


  • 1000 CFM- delivered, Dual Speed, Variable Speed
  • True HEPA Filtration for airborne particles, mold spores, etc.
  • Activated Carbon / Charcoal Gas Phase Adsorbents (100 pounds) for chemical fumes, toxic gases, odor
  • Mold, asbestos abatement, remediation in schools, hospitals, commercial building,
  • Hospital contractors / renovation, construction, disaster restorator, etc.
  • Negative air pressure , Positive air pressure applications- comes with one flange adaptor for a 12 inch diameter flex hose.
  • AirRhino is also available in the Upright, Vertical housing, Narrow footprint configuration

Electrocorp RAP (Radial Air Purifier) Series

  • The Electrocorp Radial Air Purifiers (RAPs) represent an upgrade to our RSU industrial air scrubbers. Electrocorp RAP Series
  • Designed initially for clean rooms and critical care environments, our new RAPs are now capturing gas and particle phase contaminants in a broad range of industrial, commercial, home and office applications.
  • The change in design from our more industrial looking RSU Series has allowed our RAP Series to be even easier to service.
  • As with our RSUs, our RAP model air scrubbers eject the scrubbed air out of the top of the unit to the ceiling to create a room-wide ceiling-to-floor laminar airflow pattern for efficient contaminant control.
  • UL/CSA listed blower - Continuous duty rated – run 24 hours - Internal thermal protection
  • Available voltage - VAC: 115/60Hz or 220/50Hz

 Electrocorp RSU (Radial Scrub Unit) Series

  • Among the notable users of the Electrocorp RSUs are the U.S. Navy and Delta Airlines. RSU Air Scrubber, Air Filtration SystemsThese units are relied upon for odor and VOC removal by a broad range of industries.
  • The Electrocorp RSUs are operating in prison armories where weapons are cleaned, chemical laboratories, and a multitude of manufacturing companies where people must work with high concentrations of VOCs such as Xylene, Toluene, Benzene, Chlorine, Cyclohexanone, MEK and MPK.
  • The RSU (Radial Scrub Unit) Space SaverTM Series is cylindrical in shape and, depending on model, has a footprint of 19 inches.
  • This is a ductless, re-circulating air scrubber with built-in casters so it can be easily rolled around on your floor.
  • It has a 360 degree air-in draw, and is efficient in removing approximately 90% of all gas phase contaminants (VOCs) per air pass.
  • It filters the air of dust and contaminant gases, then ejects the cleaned air out the top of the unit to the ceiling.
  • The gentle ceiling to floor air pressure generated by the RSU creates the correct form of air movement needed to force heavier than air VOCs toward the floor to then be captured as they are drawn through the RSU carbon cartridge.
  • Units can be used as stand-alone air cleaners or can be ducted directly ("R"= Reverse Flow) to process machinery for source capture.
  • UL/CSA listed blower - Continuous duty rated – run 24 hours - Internal thermal protection
  • Available in : Voltage - VAC: 115/60Hz or 220/50Hz

Fume Extractor LD 450 - Light Duty, Intermittent Welding

  •     40 lb. refillable carbon canisterElectrocorp LD 450 Light Duty Welding Fume Extractor
  •     2” HEPA; 2” pre-filter
  •     1” stainless steel spark arrestor
  •     400 SFM; 115V; 60 Hz
  •     Option: Available in 230V
  •     4” X 6’ articulated flex arm
  •     2“ nylon wheels for easy maneuverability
  •     Welding and grinding dust tray
  •     Dimensions: 22.5” X 16” X 29”; Weight: Approximately 176 lbs.
  •     Amps: 1.85 at 115

Laser Cutting, Laser Engraving Fume Extractor

Laser 6000 (aka Laser LX)Laser LX


Tested and refined to resist clogging, this unit features a 0.5 micron pre-filer to capture larger particulate matter, a medical grade HEPA filter to remove 99.97% of 0.3 micron particulate matter and a large 24 lb. carbon filter to adsorb volatile organic compounds, gases and smoke odor. A 6" flange for ducting is also included.


Electrocorp RSU 12 CCR - 350 CFM - (Activated Charcoal / Carbon Filter - Reverse Flow)RSU Series Reverse Flow Laser Fume Extractor


RSU 20 CCHR - 450 CFM - (Activated Charcoal / Carbon Filter + HEPA filter - Reverse Flow)

EZ Flow Air Scrubbing for Drum Vents

Adsorb hazardous airborne gases and odors & protect the contents of a drum ventEZ Flow Air Scrubbing for Drum Vents from environmental contaminants.


When solvents and other chemicals are either poured into or extracted from a 5-55 gallon drum, air is displaced. This causes dangerous contaminated air to either be expelled from the bung hole or drawn into the drum.


The EZ Flow is screwed into the standard thread of the bung hole, the displaced air is forced through a particulate filter and a thick 9” activated carbon bed where many gases, VOCs and odors are safely adsorbed.

For Effective Chemical & Particle Air Filtration


Ideal for small and medium industrial applications, the 8000 Exec features 25 pounds of activated carbon to effectively remove chemicals, gases and odors, with a superHEPA filter for advanced particle protection.EL 8000 Series Air Filtration System


Green Features:


  • All-metal Housing
  • Ozone-free filtration technology
  • Energy efficient
  • Refillable carbon canisters
  • Styrofoam free
  • North American sourced parts and materials
  • North American assembly

AirRhino Junior (aka 9000 Series)

When floor space is limited choose the cost-effective, space-saving solution for removing odors, smoke, chemicals, gases, and airborne particles.AirRhino Junior formerly known as the 9000 Series


  • 15 - 30 pounds of deep bed activated carbon / activated charcoal filter to remove airborne chemicals, gases, fumes, and odors
  • 2 inch - 4 inch Medical grade HEPA filter to remove 99.97% of all dust, allergens, viruses and other airborne particles down to 0.3 microns
  • Variable speed, 735 CFM motor / blower
  • Designed for 24 / 7 operation
  • Low energy consumption
  • Ceiling or wall bracket mountable


Three (3) configurations to choose from: Restorator - Medical - Smoke

* Specs / Prices subject to change without prior notice | Call to order your replacement filters

© 1996-2016 Produits D'Air Espitech, SENC ( Espitech Air Products) All Rights Reserved. All pages and their content are provided as information only. Use of this online service is subject to the disclaimer and the terms and conditions.